1. Home
  2. Modules
  3. Touch Switch Module MDOT-6 LCD

Touch Switch Module MDOT-6 LCD

Technical data

Supply voltage
11-16V DC

Current consumption (normal)
30mA

Maximal current consumption
120mA

Number of sensor fields
6

Dimensions

Width
90 mm

Height
90 mm

Depth (incl. PCB)
21 mm

General features

The MDOT-6LCD touch panel is a component of the Ampio Smart Home system.
Typical functionalities:

  • turning on any device / lighting fixture connected to a smart home system
  • providing information on the state of a device / lighting (on / off)
  • showing sensor data on the LCD display, such as RDS radio station name, time or other data from smart house modules

The device communicates with the system via CAN bus. Its power supply requires voltage in range of 11-16VDC.

The contact switch has 6 sensor fields with the use of which any system receivers can be controlled. It is possible to configure a different action for a short tap, and another one for a longer press.

LED RGB lights placed over the sensor fields inform about the device’s status – whether it is on, or off. Their operations can also be freely configured, and can signal any other event that occurred in the system.

The brightness and colours of pictograms’ illumination, as well as the status lights, can be regulated in a configuration program according to customer’s preferences, so that they do not blind the user at night. The panel has a proximity sensor, thanks to which, when there is no object in front of the panel, the light intensity is set to a predefined value, and after bringing a hand closer to it, it will light up to a higher set value.

Pictograms that are offset-printed are extremely durable and allow for customisation of the graphic design to customer’s individual order (e.g. version for roller blinds control, lighting,
atmospheric scenes).

The module is also equipped with a buzzer indicating a sensor field has been pressed. User may adjust sound volume and type at their discretion.

The device has a port for connecting the Dallas 18B20 temperature sensor. The sensor data are transmitted to CAN bus and may be used for controlling heating systems, window blinds or any other system peripherals.

LCD screen with three independent sections allows to display many of different informations at the user’s discretion.

It can be for example:

  • sensor data, such as temperature, humidity, pressure etc.
  • RDS radio station name from the MAMP-1s A/V Receiver module
  • time, date or other data from smart house modules

Installation

A special guiding plate is used for installing the switch.

Find out how to fix the plate by reviewing the following instruction:
Installation of a guiding plate for the 2, 4, 6, 9-field panel.

Programming

The module may be programmed with a special programmer, available for authorised technicians, and the Ampio SmartHome CAN configurator software. This program provides for setting up the module’s response to input signals and other information from the CAN bus.

Module dimensions

Dimensions expressed in mm.

Click to enlarge and open in a new tab.

Connection diagram

Click to enlarge and open in a new tab.

Related Articles