1. Home
  2. Installer guides
  3. Server configuration (M-SERV)

Server configuration (M-SERV)

WWW panel of the bus server M-SERV.
Applies to the RP-LASH-010 image version v10.75

First configuration

First launch of M-SERV can take about 5 minutes due to time-consuming generation of encryption keys.

A prerequisite to getting access to the server and Smart Home Manager application is setting up passwords by entering the server address in your web browser, or at http://ampio.local

After filling in all the fields and clicking Save, changes will be sent to the server. Then, once the server is rebooted, entering the server’s address in the browser will take you to the login screen where you log in with the password set up in the precious step.

The previously set password will also be the password to Node-RED for an admin user.

Description of subsites

Status – network

Here you can find information about the server, such as Default gate, DNS1 and DNS2. You will also be able to see whether DHCP is active, or not. Other information that can be checked here are: server’s IP address, its MAC and VPN address.

Status – system

The tab provides information about the system.

Explanation of diagnostic data:

Factory MAC address
server’s MAC address in the CAN network
Ethernet interface MAC address
physical address of the network interface controller
System operation mode
indicates whether the system is working correctly, or not
Data carrier mode
indicates whether the system operates in a safe mode (read-only), or in a read-and-write mode. By default, the system should operate in a safe mode.
System uptime
indicates the duration of time that the system has been working since the last launch.
Internet time synchronisation
indicates if the system downloads the current date and time correctly from the Internet
System time
shows the current time on the server
Memory state
indicates the current memory usage on the server
Memory consumption
indicates the current RAM memory usage
CPU load
indicates the current processor load in the server
Space occupancy folder RW
indicates the current storage usage in a non-volatile folder (RW)
indicates the current version of Node-RED installed
Node-RED Ampio plugin version
indicates the current version of installed Ampio Node-RED plug-in
MQTT broker
indicates the current version of installed MQTT broker
Ampio MQTT bridge
indicates the current version of installed MQTT bridge software
Ampio server status
indicates the current operating status of the Ampio application server
AmpioCloud status
indicates the connection status between the server and Ampio Cloud, which is indispensable to control the house from outside the local network’s range
AmpioCloud Info
indicates the current status of the Ampio Cloud service
System engine
indicates the current version of the main system engine
HTTP engine version
indicates the current version of the http server
The configuration engine version
indicates the current version of the system configuration engine
Kernel version
indicates the current version of the Linux system’s kernel
displays information about the M-SERV-3s processor


Local network

It makes it possible to manage the local network. The host name can be changed, but requires a system reboot. The host address enables accessing the server by entering the following in the browser: http://hostname.local

DHCP is selected by default. If you untick it, you will be able to change the IP address, IPv4 subnet mask, gateway and DNS servers’ addresses. By default, the settings are automatically downloaded from the router via DHCP.

Changing the above-listed parameters will change the server’s IP address. Make sure that the settings that you enter are correct. If your settings are incorrect, the server connectivity may be lost.

We can also set the parameters of the local network.

In order to do that, tick the box next to “Enable” and save the settings. After saving the settings and clicking the “WiFi scan” button, select a network from the list, enter its password and save. M-SERV will make a connection with the network – it takes about 1-2 minutes.


The tab allows you to change the server address, user name and password. You can also find the VPN status here and its IP. You can deselect automatic connection, or connect by clicking on the “Connect” button. By default, M-SERV is connected to the safe Ampio Cloud network.


If you want to access your local network from any place in the world not with the use of a fixed IP address, but with dynamically obtained public address from the DHCP server (what Neostrada is also doing), you must use the DDNS (Dynamic Domain Name System) service. The service will not work if your ISP does not offer a public IP address. M-SERV can send your current IP address to the DDNS server in order to update it.

Supported protocols:

  • dnspark protocol
  • dslreports
  • dyndns1
  • dyndns2
  • easydns
  • namecheap
  • zoneedit1
  • Changeip
  • googledomains
  • duckdns
  • nsupdate


By default, the SSH server is inactive. In order to make connections via the SSH server (access to Linux), select “Enable SSH server” and apply changes. Then create a root user password (it should contain at least 8 characters).

SSH is accessible on port 2022.


This is a tab used to create a connection with an intercom. By default this server is inactive. It is possible to modify the TCP port and to activate or deactivate video or guests support. Here, you will enter the SIP service provider’s details. You can also add, edit and remove users.


The HTTPS server is active by default. The tab provides information about the current certificate and allows you to generate a self-signed certificate and to upload your own certificate. SSL/TLS configuration is meant for advanced installers.


Smart Home

In this tab you can edit the MQTT bridge and app server settings. It is important to set up the geographical latitude and longitude in order for the mobile app to correctly read the sunset and sun rise times for different scenes.

The current geographical location can also be set by clicking on the “Get” button next to the description “Get location from browser”. This will allow the local services of your browser to download your current location. It requires, however, an HTTPS connection with the server (prefix https:// before the server’s address in a browser).

HTTPS connection with the server will prompt a message about an unverified certificate. It is normal in case of devices in local networks – you should select the option “Trust” in the browser.
Never trust unverified certificates outside of your local network (internet portals, banks, etc.)

You can also change the location of where the status and log databases are being saved. By default, the information is retained in the volatile memory, which is deleted with each device reboot. After inserting a UDB mass storage into the M-SERV port, you can select it as a data carrier for the databases. The data will then be retained in non-volatile memory of the device.


You can upload, edit and download script files here and set up a scheduled autostart (start every 5 min, 1 hour, 1 day, week, month), as well as autostart on every system startup.

At the top of the page there is a path where scripts are saved: /ampio/rw/user-scripts

Restart and factory settings

The restart function allows one to perform a server restart with the use of one button. The procedure takes about 2-3 minutes.

The button “Restore factory settings” allows you to clear all server settings and its memory.

Restoring factory settings cannot be undone!

Settings backup

Enables downloading a copy of settings in the .zip format.


This section allows you to choose whether the history will be saved as Syslog, or in a file. It is important to remember that after rebooting the server, the Syslog logs history will be lost. In order not to lose access to it, also after rebooting, select the type of logs File, place a memory carrier in a port and select it in the field File.

You can also choose to save logs on an external syslog server (e.g. NAS servers). You need to enter the syslog server’s IP address in the logs settings, as shown below.

Time zone

This section allows you to set up a time zone for the server in order to display the correct time on e.g. M-DOT touch panels. The current time from M-SERV is also broadcasted to the CAN network, which enables sychronisation of time in M-RTs and touch panels. This makes setting up the time zone correctly crucial.

Setting up a time zone is important to ensure current time in the CAN network.


This section provides information about the software version and allows you to update the software if a newer version gets released.

Do not switch off the power supply or disconnect the network cable from the server when it is busy updating!


This section allows you to switch the BroadLink plugin on and off in order to manage the BroadLink IR sensor used to control infra-red devices.

Disable this plugin if you do not use a BroadLink device.


Zarejestrowanie serwera umożliwia wystawienie karty gwarancyjnej. Rejestracja instalacji inteligentnej jest warunkiem otrzymania 5-letniej gwarancji na urządzenia w sieci.

Register your server in order to receive a 5-year warranty for Ampio Smart Home devices.


In this section you can upload audio and video files, pictures and documents that will then be available on the 8090 port via the HTTP protocol.

Zmiana hasła

A form to reset your password is also available. It is the password used both for the WEB panel and the Node-RED platform for the admin user.

Remember and keep your password safe. Do not set up an easy password. The entered password will also be used to log into the Node-RED password as an admin user.

Related Articles